Ricoh D104 Field Service Manual page 832

3. Appendix: SP Mode Tables
019 Paper Transfer: Low: 1st: S5
020 Paper Transfer: Low 2nd: S5
[Plain:L-Edge Correction] DFU
Adjusts the correction to the paper transfer roller current at the paper leading edge in each
3
mode. SP2403 and SP2407 are multiplied by these SP values.
2421
Normal: 120 mm/sec, Low: 60 mm/sec
• The paper leading edge area can be adjusted with SP2422.
001 Paper Transfer: Normal: 1st
002 Paper Transfer: Normal: 2nd
003 Paper Transfer: Low: 1st
004 Paper Transfer: Low: 2nd
[Plain: Switch Timing: L-Edge] DFU
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge plate at the
2422
paper leading edge between the erase margin area and the image area.
Normal: 120 mm/sec, Low: 60 mm/sec
001 Paper Transfer: Normal: 1st
002 Paper Transfer: Normal: 2nd
003 Paper Transfer: Low: 1st
004 Paper Transfer: Low: 2nd
114
[1 to 50 / 27 / 1/step]
*ENG
150 mm > S5 size (Paper width)
[1 to 50 / 4 / 1/step]
*ENG
150 mm > S5 size (Paper width)
*ENG
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
*ENG
*ENG
*ENG
[0 to 30 / 0 / 2 mm/step]
*ENG
*ENG