Ricoh D104 Field Service Manual page 1002

3. Appendix: SP Mode Tables
5849 2 Switch to Print
003 Total Counter
3
5850 [Address Book Function]
Replacement of Circuit Classification Japan Only
The machine is sold ready to use with a G3 line. This SP allows you to switch all at once
003
to convert to G4 after you add a G4 line. Conversely, if for some reason the G4 line
becomes unusable, you can easily switch back to G3.
[Bluetooth Mode]
5851
Sets the operation mode for the Bluetooth Unit. Press either key.
[0:Public] [1: Private]
[Stamp Data Download]
Use this SP to download the fixed stamp data stored in the firmware of the ROM and copy
it to the HDD. This SP can be executed as many times as required. This SP must be executed
5853
after replacing or formatting the hard disks.
• This SP can be executed only with the hard disks installed.
[Remote ROM Update]
5856
Allows the technician to upgrade the firmware using a local port (IEEE1284) when
updating the remote ROM.
002 Local Port
5857 [Save Debug Log]
284
Determines whether the installation date is printed on
the printout for the total counter.
[0 or 1 / 1 / - ]
0: OFF (No Print)
1: ON (Print)
-
*CTL -
[0 to 1 / 0 / 1/step]
*CTL 0: Disable
1: Enable
*CTL -