Ricoh D104 Field Service Manual page 863

[SP 2: SW Timing: L-Edge] DFU
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge plate at the
2822
paper leading edge between the erase margin area and the image area.
Normal: 120mm/sec, Low: 60mm/sec
001 Paper Transfer: Normal: 1st
002 Paper Transfer: Normal: 2nd
003 Paper Transfer: Low: 1st
004 Paper Transfer: Low: 2nd
[SP 2: T-Edge Correct] DFU
Special 2 Paper: Trailing Edge Correction
Adjusts the correction to the paper transfer roller current for the paper trailing edge in each
mode. SP2803 and SP2807 are multiplied by these SP values.
2823
Normal: 120mm/sec, Low: 60mm/sec
• The paper trailing edge area can be adjusted with SP2824.
001 Paper Transfer: Normal: 1st
002 Paper Transfer: Normal: 2nd
003 Paper Transfer: Low: 1st
004 Paper Transfer: Low: 2nd
[SP 2: SwTiming: T-Edge] DFU
Adjusts the bias/voltage switch timing of the paper transfer roller/discharge plate at the
2824
paper trailing edge between the erase margin area and the image area.
Normal: 120mm/sec, Low: 60mm/sec
001 Paper Transfer: Normal: 1st
002 Paper Transfer: Normal: 2nd
003 Paper Transfer: Low: 1st
004 Paper Transfer: Low: 2nd
*ENG
*ENG
[0 to 30 / 0 / 2 mm/step]
*ENG
*ENG
*ENG
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
*ENG
*ENG
*ENG
[-98 to 0 / 0 / 2 mm/step]
*ENG
*ENG
System SP2xxx
3
145