Ricoh D104 Field Service Manual page 935

4602 [Scanner Memory Access]
001 Scanner Memory Access
4603 [AGC Execution]
001 HP Detection Enable
002 HP Detection Disable
4604 [FGATE Open/Close] DFU
001 -
4609 [Gray Balance Set: R] DFU
001 Book Scan
002 DF Scan
4610 [Gray Balance Set: G] DFU
001 Book Scan
002 DF Scan
4611 [Gray Balance Set: B] DFU
001 Book Scan
002 DF Scan
[Black Level Adj. Display] DFU
4623
RE: Red Even signal, RO: Red Odd signal
Enables the read and write check for the SBU
-
registers.
- [0 or 1 / 0 / 1/step] Executes the AGC.
- [0 or 1 / 0 / 1/step] DFU
Opens or closes the FGATE signal. This SP
automatically returns to the default status (close)
after exiting this SP.
-
[0 or 1 / 0 / 1/step]
0: OFF, 1: ON
*ENG [-512 to 511 / -46 / 1 digit/step]
*ENG [-512 to 511 / -46 / 1 digit/step]
*ENG [-512 to 511 / -20 / 1 digit/step]
*ENG [-512 to 511 / -20/ 1 digit/step]
*ENG [-512 to 511 / -28 / 1 digit/step]
*ENG [-512 to 511 / -28 / 1 digit/step]
System SP4xxx
3
217