Ricoh D104 Field Service Manual page 128

2. Installation
2
12. Remove the connector cap [A] from the tray heater harness.
13. Connect the relay harness [B] to the tray heater harness [C] of the mainframe.
• Do not connect the relay harness [B] to the tray heater harness of the mainframe before installing
the securing bracket [D]. Otherwise, the securing bracket may pinch the relay harness.
14. Clamp the harness [A] as shown above ( x 1).
15. Reinstall the rear lower cover of the mainframe ( x 5).
16. Reinstall all the tray cassettes.
126