Ricoh D104 Field Service Manual page 322

5. System Maintenance
1007 [By-Pass Size Detection] By-Pass Size Detection Display
0:LT SEF/ 1:LG
Enables or disables the automatic paper size detection function of the by-pass tray.
001
This SP determines what paper size the machine detects if the detected size is less than 8.5".
0: LT SEF (default), 1: LG
[Reload Permit Setting]
1101
Specifies the settings of the reload permit for cold temperature in color mode.
Destination: NA; North America, TWN; Taiwan, EU; Europe, AA; Asia Pasific
Pre-rotation Start Temp.
001
5
Specifies the pre-rotation start temperature.
Reload Target Temp.:Center
002
Specifies the reload target temperature of the heating roller.
Reload Target Temp.:Press
003
Specifies the reload target temperature of the pressure roller.
Temp.:Delta:Cold: Center
004
Specifies the temperature correction of the heating roller (center) when the fusing unit is
determined as cold state.
Temp.:Delta:Cold:End
005
Specifies the temperature correction of the heating roller (end) when the fusing unit is
determined as cold state.
Temp.:Delta:Cold: Press
006
Specifies the temperature correction of the pressure roller when the fusing unit is determined
as cold state.
Rotation Time:Cold
007
Specifies the threshold time for the fusing unit heating when the fusing unit is determined as
cold state.
320
*ENG -
*ENG [0 to 75 / 50 / 1 deg/step]
*ENG [135 to 145 / 135 / 1 deg/step]
*ENG [0 to 200 / 20 / 1 deg/step]
*ENG [0 to 100 / 10 / 1 deg/step]
*ENG [0 to 100 / 45 / 1 deg/step]
*ENG [0 to 100 / 0 / 1 deg/step]
*ENG [0 to 200 / 2 / 1 sec/step]