Pm Parts Settings; Before Removing The Old Pm Parts - Ricoh D104 Field Service Manual

3. Preventive Maintenance

PM Parts Settings

Before Removing the Old PM Parts

1. Enter the SP mode.
2. Output the SMC logging data with SP5-990-004.
3. Set the following SPs to "1" before you turn the power off. Then, the machine will reset the PM counters
3
automatically. In the case of developer, the developer initialization will also be done automatically.
4. Exit the SP mode.
Development Unit
Drum Unit
ITB Unit
Fusing Unit
Heating Roller Unit
ITB Cleaning Unit
PTR Unit
PCDU Toner Collection Bottle
ITB Toner Collection Bottle
1
• * : Only if the toner collection bottle is replaced before the machine detects near-full.
For the following units, there is a new unit detection mechanism. It is not necessary to reset PM counters.
• Development unit
150
Item SP
Black: 3902-001
Cyan: 3902-002
Magenta: 3902-003
Yellow: 3902-004
Black: 3902-009
Cyan: 3902-010
Magenta: 3902-011
Yellow: 3902-012
3902-013
3902-014
3902-016
3902-017
3902-018
1
3902-019*
1
3902-020*