Ricoh D104 Field Service Manual page 983

209 Instl Clear
250 CommLog Print
5821 [Remote Service Address]
002 RCG IP Address
[NV-RAM Data Upload]
Uploads the UP and SP mode data (except for counters and the serial number) from the
5824
NVRAM to an SD card. For details, see the "NVRAM Data Upload/Download" in the
"System Maintenance Reference" of the Field Service Manual.
001 -
[NV-RAM Data Download]
Downloads the UP and SP mode data from an SD card to the NVRAM. For details, see the
5825
"NVRAM Data Upload/Download" in the "System Maintenance Reference" of the Field
Service Manual.
001 -
5828 [Network Setting]
-2393 RCG device not managed
-2394 Device not managed
-2395 Box ID for RCG device is illegal
-2396 Device ID for RCG device is illegal
-2397 Incorrect ID2 format
-2398 Incorrect request number format
Releases the machine from its Embedded RCG Gate setup.
NOTE: Turn off and on the main power switch after this
setting has been changed.
Prints the communication log.
Sets the IP address of the RCG (Remote
*CTL Communication Gate) destination for call
processing at the remote service center.
# -
# -
*CTL -
System SP5xxx
3
265