Ricoh D104 Field Service Manual page 920

3. Appendix: SP Mode Tables
[Toner Collection Bttl Full]
3800
Displays/ adjusts the PCDU toner collection bottle detection settings.
Condition
001
Displays the current condition of the PCDU toner collection bottle.
0: Factory default, 1: Before near full, 2; Near full, 3: Full, 4: Reserved
3
002 Detection Times
003 Print Page AF Near Full
004 Pixel Count AF Near Full
005 Pixel Count AF Replacement
Coefficient
008
Adjusts the toner amount between near full and full. (0.1 indicates 10%.)
Alarm Setting
011
NOTE:
If the PCDU toner collection bottle has been replaced before the machine detects used toner
near full when this setting is set to "0", the machine cannot detect toner collection bottle near
full. In that case, set SP3-902-017 to "1".
Day Thresh:NF
Sets the threshold days for the near-full display. The near-full of the PCDU toner collection
012
bottle is displayed after the toner collection full sensor has detected the actuator in the PCDU
toner collection bottle.
202
*CTL [0 to 4 / 0 / 1 /step]
Not used
*CTL
[0 to 50 / - / 1 /step]
Not used
*CTL
[0 to 2000 / 0 / 1 sheet/step]
Not used
*CTL
[0 to 200000 / - / 1 cm
Not used
Displays the pixel counter after replacement of
*CTL
toner collection bottle.
[0 to 200000 / - / 1 cm
*ENG [0.1 to 1 / 1 / 0.1 /step]
Enables or disables the calling for @Remote.
[0 or 1 / 1 / - ]
*ENG
0: Enable @Remote calling
1: Disable @Remote calling
*ENG [1 to 30 / 10 / 1 day/step]
2
/step]
2
/step]