Ricoh D104 Field Service Manual page 842

3. Appendix: SP Mode Tables
[Thick 2: L-Edge Correct] DFU
Thick 2 Paper: Leading Edge Correction
Adjusts the correction to the paper transfer roller current at the paper leading edge in each
mode. SP2553 and SP2558 are multiplied by these SP values.
2571
Thick: 60 mm/sec
• The paper leading edge area can be adjusted with SP2572.
3
001 Paper Transfer: 1st
002 Paper Transfer: 2nd
[Thick 2: Switch Timing: L-Edge] DFU
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge plate at the
2572
paper leading edge between the erase margin area and the image area.
Thick: 60 mm/sec
001 Paper Transfer: 1st
002 Paper Transfer: 2nd
[Thick 2: T-Edge Correction] DFU
Thick 2 Paper: Trailing Edge Correction
Adjusts the correction to the paper transfer roller current for the paper trailing edge in each
mode. SP2553 and SP2558 are multiplied by these SP values.
2573
Thick: 60 mm/sec
• The paper trailing edge area can be adjusted with SP2574.
001 Paper Transfer: 1st
002 Paper Transfer: 2nd
[Thick2:T-Edge Correct] DFU
Adjusts the bias/voltage switch timing of the paper transfer roller/discharge plate at the
2574
paper trailing edge between the erase margin area and the image area.
Thick: 60 mm/sec
124
*ENG [0 to 400 / 100 / 5%/step]
*ENG Not used
*ENG [0 to 30 / 0 / 2mm/step]
*ENG Not used
*ENG [0 to 400 / 100 / 5%/step]
*ENG Not used