Ricoh D104 Field Service Manual page 209

8. Place the toner hopper unit [A] on sheets of paper.
When installing a new toner hopper unit
Developer must be added to the new toner hopper. Some developer (8 g) is provided with each new toner
hopper unit. Pour this into the toner hopper unit before reattaching the inner cover.
1. Slowly open the toner hopper shutter [A].
• Do not try to open the toner hopper shutter fully at one try. This shutter comes off easily without
the inner cover. If the toner hopper shutter has come off, reattach it.
2. Pour the developer (8 g) into the inlet [B] of the toner hopper unit.
3. Close the toner hopper shutter.
4. Reassemble the machine.
Image Creation
4
207