Ricoh D104 Field Service Manual page 857

[SP 1:SwTiming:L-Edge] DFU
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge plate at the
2772
paper leading edge between the erase margin area and the image area.
Normal: 120mm/sec, Low: 60mm/sec
001 Paper Transfer: Normal: 1st
002 Paper Transfer: Normal: 2nd
003 Paper Transfer: Low: 1st
004 Paper Transfer: Low: 2nd
[SP1: T-Edge Correct] DFU
Special 1 Paper: Trailing Edge Correction
Adjusts the correction to the paper transfer roller current for the paper trailing edge in each
mode. SP2753 and SP2757 are multiplied by these SP values.
2773
Normal: 120 mm/sec, Low: 60 mm/sec
• The paper trailing edge area can be adjusted with SP2774.
001 Paper Transfer: Normal: 1st
002 Paper Transfer: Normal: 2nd
003 Paper Transfer: Low: 1st
005 Paper Transfer: Low: 2nd
[SP 1:SwTiming:T-Edge] DFU
Adjusts the bias/voltage switch timing of the paper transfer roller/discharge plate at the
2774
paper trailing edge between the erase margin area and the image area.
Normal: 120mm/sec, Low: 60mm/sec
001 Paper Transfer: Normal: 1st
002 Paper Transfer: Normal: 2nd
003 Paper Transfer: Low: 1st
004 Paper Transfer: Low: 2nd
*ENG
*ENG
[0 to 30 / 0 / 2 mm/step]
*ENG
*ENG
*ENG
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
*ENG
*ENG
*ENG
[-98 to 0 / 0 / 2 mm/step]
*ENG
*ENG
System SP2xxx
3
139