Ricoh D104 Field Service Manual page 843

001 Paper Transfer: 1st
002 Paper Transfer: 2nd
2580 [Thick 2 Env. Correct Table] DFU
003 Paper Transfer: BW: 1st
004 Paper Transfer: BW: 2nd
005 Paper Transfer: FC: 1st
006 Paper Transfer: FC: 2nd
[OHP: Bias: BW]
2603
Adjusts the current for the paper transfer roller for OHP in black-and-white mode.
001 Paper Transfer
[OHP: Bias: FC]
2608
Adjusts the current for the paper transfer roller for OHP in full color mode.
001 Paper Transfer
[OHP: L-Edge Correct] DFU
OHP: Leading Edge Correction
Adjusts the correction to the paper transfer roller current at the paper leading edge in each
2621
mode. SP2603 and SP2608 are multiplied by these SP values.
• The paper leading edge area can be adjusted with SP2622.
001 Paper Transfer
[OHP: Switch Timing: L-Edge] DFU
2622
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge plate at the
paper leading edge between the erase margin area and the image area.
001 Paper Transfer
*ENG [0 to -100 / 0 / 2 mm/step]
*ENG Not used
*ENG [0 to 50 / 36 / 1 /step]
*ENG Not used
*ENG [0 to 50 / 23 / 1 /step]
*ENG Not used
*ENG [0 to 200 / NA: 15, EU/AA: 13 / 1 – A /step]
*ENG [0 to 200 / NA: 24, EU/AA: 20 / 1 – A /step]
*ENG [0 to 400 / 100 / 5%/step]
*ENG [0 to 30 / 0 / 2 mm/step]
System SP2xxx
3
125