Ricoh D104 Field Service Manual page 57

• Attach shipping tape to the covers and doors.
• Shrink-wrap the machine tightly.
• After you move the machine, Make sure you do the "Auto Color Registration" as follows. This
optimizes color registration.
• Do the "Forced Line Position Adj. Mode c" (SP2-111-3).
• Then do the "Forced Line Position Adj. Mode a" (SP2-111-1).
To check if SP 2-111-1 was successful, watch the screen during the process. A message is
displayed at the end. Also, you can check the result with SP 2-194-10 to -12.
• Make sure that the side fences in the trays are correctly positioned to prevent color registration
errors.
Copier Installation
2
55