Ricoh D104 Field Service Manual page 779

001 Feed Permit Condition
Selects the feed permission type.
0: No paper feed permission
1: Paper feed permission is done when changing the paper size from smaller one to larger
one.
2: Paper feed permission is done when changing the paper size from smaller one to larger
one and changing the copy/print mode from duplex mode to simplex mode.
[Maximum Duty Switch]
DFU
1132
The following SPs below are desgined for the factory use only. Do not change the adjusted
setting.
001 Control Method Switch
Selects the heater control method.
Use "1: CONTORL" if hot offset occurs after power-on and input voltage is relatively hight.
[PowerControl]
003
Power Offset
012 Voltage Detection
[Voltage Detection]
013
Temp.:Threshold Value
[Last Paper Heater OFF Control]
DFU
1133
The following SPs below are desgined for the factory use only. Do not change the adjusted
setting.
Heater OFF Time: Normal
001
Speed: FC
[0 to 2 / 0 / 1 /step]
0: Productivity Priority mode
*ENG
1: Quality Priority mode 1
2: Quality Priority mode 1
[0 or 1 / 1 / 1 /step]
*ENG
0: FIXED, 1: CONTROL
*ENG [-4 to 4 / 0 / 1 /step]
*ENG [0 to 350 / 0 / 1 V/step]
*ENG [0 to 200 / 80 / 1°C/step]
*ENG [0 to 20000 / 2400 / 1 msec./step]
System SP1-xxx
3
61