2. Installation
IEEE 802.11 a/g, g (Wireless LAN)
Installation Procedure
2
• Unplug the main machine power cord before you do the following procedure.
You can only install one of the following network interfaces at one time: (IEEE 802.11 a/g, g (Wireless
LAN), IEEE1284, Bluetooth).
1. Remove the I/F-slot cover [A] from the I/F-slot (
2. Install the wireless LAN board [B] (Knob-screw x 2) into the I/F-slot.
3. Make sure that the machine can recognize the option (see "Check All Connections" at the end of this
section).
138
x 2).