Ricoh D104 Field Service Manual page 683

6. If Jam 17 still occurs, turn on the paper feed motor using SP5-804-009 (Output check: Paper Feed
M2:CW:190mm/s).
7. Press the surface of the vertical transport roller [A] for the tray 2 gently with a small piece of paper,
as shown above.
8. Replace the one-way clutch [A] with P/N D1051166 if the roller stops easily.
Jam 51/ Jam 52: Vertical transport sensor 1/2 does not turn off.
1. Open the lower right door.
Troubleshooting Guide
6
681