Ricoh D104 Field Service Manual page 308

4. Replacement and Adjustment
4
Restoring the Encryption key
When replacing the controller board for a model in which the HDD encryption unit has been installed,
updating the encryption key is required.
1. Prepare an SD card which is initialized.
2. Make the "restore_key" folder in the SD card.
3. Make an "nvram_key.txt" file in the "restore_key" folder in the SD card.
4. Ask an administrator to input the encryption key (this has been printed out earlier by the user) into the
"nvram_key.txt" file.
5. Remove only the HDD (
6. Turn on the main power switch.
7. Confirm that the prompt on the LCD tells you to install the SD card (storing the encryption key) in the
machine.
8. Turn off the main power switch.
9. Remove the SD slot cover (
10. Insert the SD card that contains the encryption key into SD slot 2.
11. Turn on the main power switch, and the machine automatically restores the encryption key in the flash
memory on the controller board.
12. Turn off the main power switch after the machine has returned to normal status.
13. Remove the SD card from SD slot 2, and then attach the SD slot cover (
306
p.296 "HDD").
x 1).
x 1).