Ricoh D104 Field Service Manual page 882

3. Appendix: SP Mode Tables
T1 Bias: C
014
Adjusts the image transfer belt bias for Magenta.
T1 Bias: M
015
Adjusts the image transfer belt bias for Cyan.
T1 Bias: Y
016
Adjusts the image transfer belt bias for Yellow.
3
Developer Agitation Time
017
Specifies the developer mixing time at the toner density adjustment.
C-Pattern: LD: DUTY: Bk
Adjusts the LD duty for the toner consumption mode at the toner density adjustment.
018
In toner consumption mode, toner is discharged when the detected development gamma
values (SP3611-001) exceed the target values (SP3611-005) by more than the specified
thresholds (SP3239-009).
C-Pattern: LD: DUTY: C
Adjusts the LD duty for the toner consumption mode at the toner density adjustment.
019
In toner consumption mode, toner is discharged when the detected development gamma
values (SP3611-002) exceed the target values (SP3611-006) by more than the specified
thresholds (SP3239-009).
C-Pattern: LD: DUTY: M
Adjusts the LD duty for the toner consumption mode at the toner density adjustment.
020
In toner consumption mode, toner is discharged when the detected development gamma
values (SP3611-003) exceed the target values (SP3611-007) by more than the specified
thresholds (SP3239-009).
C-Pattern: LD: DUTY: Y
Adjusts the LD duty for the toner consumption mode at the toner density adjustment.
021
In toner consumption mode, toner is discharged when the detected development gamma
values (SP3611-004) exceed the target values (SP3611-008) by more than the specified
thresholds (SP3239-009).
164
*ENG [0 to 80 / 10 / 1 A/step]
*ENG [0 to 80 / 10 / 1 A/step]
*ENG [0 to 80 / 10 / 1 A/step]
*ENG [0 to 250 / 10 / 1 sec/step]
*ENG [0 to 15 / 15 / 1 /step]
*ENG [0 to 15 / 15 / 1 /step]
*ENG [0 to 15 / 15 / 1 /step]
*ENG [0 to 15 / 15 / 1 /step]