Ricoh D104 Field Service Manual page 868

3. Appendix: SP Mode Tables
011 Paper Transfer:FC:Low:1st
012 Paper Transfer:FC:Low:2nd
[SP 6: Bias: BW]
2883
Adjusts the current for the paper transfer roller for special paper 6 in black-and-white mode.
001 Paper Transfer
3
[SP 6: Bias: FC]
2887
Adjusts the current for the paper transfer roller for special paper 6 in full color mode.
001 Paper Transfer
[SP6: L-Edge Correct] DFU
Special 5Paper: Leading Edge Correction
Adjusts the correction to the paper transfer roller current at the paper leading edge in each
2895
mode. SP2883 and SP2887 are multiplied by these SP values.
• The paper leading edge area can be adjusted with SP2896.
001 Paper Transfer
[SP 6: Sw Timing: L-Edge] DFU
2896
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge plate at the
paper leading edge between the erase margin area and the image area.
001 Paper Transfer
[SP6: T-Edge Correct] DFU
Special 5 Paper: Trailing Edge Correction
Adjusts the correction to the paper transfer roller current for the paper trailing edge in each
2897
mode. SP2883 and SP2887 are multiplied by these SP values.
• The paper trailing edge area can be adjusted with SP2898.
150
*ENG [1 to 50 / 48 / 1 /step]
*ENG [1 to 50 / 28 / 1 /step]
*ENG [0 to 200 / 15 / 1 – A /step]
*ENG [0 to 200 / 15 / 1 – A /step]
*ENG [0 to 400 / 100 / 5%/step]
*ENG [0 to 30 / 0 / 2 mm/step]