Ricoh D104 Field Service Manual page 805

Hide thumbs Also See for D104:

Table of Contents

[Shading Correct Setting] FA

Adjusts the area correction value for each LD power.

The main scan is divided into 16 areas. However, the image areas are limited from area 1

For BK and Magenta, area 1 is at the rear side of the machine (left side of the image) and

area 14 is at the front side of the machine (right side of the image).

For Cyan and Yellow, area 1 is at the front side of the machine (right side of the image) and

area 14 is at the rear side of the machine (left side of the image).

001 Bk: Area 0

002 Bk: Area 1

003 Bk: Area 2

004 Bk: Area 3

005 Bk: Area 4

006 Bk: Area 5

007 Bk: Area 6

008 Bk: Area 7

009 Bk: Area 8

010 Bk: Area 9

011 Bk: Area 10

012 Bk: Area 11

013 Bk: Area 12

014 Bk: Area 13

015 Bk: Area 14

016 Bk: Area 15

This is for the synchronizing detection board.

[50 to 150 / 100 / 1 %/step]

This is out of the image area.

[50 to 150 / 100 / 1 %/step]

System SP2xxx

Chapters

Table of Contents