Ricoh D104 Field Service Manual page 87

Internal Finisher (D429)
2
1. Insert the inverter unit [A] in the machine.
2. Insert two joint pins [A] into the two holes in the inner rear bracket.
3. Fully attach the front side [B] of the inverter unit to the paper exit unit of the mainframe after inserting
the two joint pins ( x 1: M3x6).
• Insert the two joint pins before attaching the front side of the inverter unit to the paper exit unit of
the mainframe. Otherwise, paper jams may occur between the paper exit unit and inverter unit.
85