Ricoh D104 Field Service Manual page 833

[Plain: T-Edge Correction] DFU
Plain Paper: Trailing Edge Correction
Adjusts the correction coefficient to the paper transfer roller current for the paper trailing
edge in each mode. SP2403 and SP2407 are multiplied by these SP values.
2423
Normal: 120 mm/sec, Low: 60 mm/sec
• The paper trailing edge area can be adjusted with SP2424.
001 Paper Transfer: Normal: 1st
002 Paper Transfer: Normal: 2nd
003 Paper Transfer: Low: 1st
004 Paper Transfer: Low: 2nd
[Plain: Switch Timing: T-Edge] DFU
Adjusts the bias/voltage switch timing of the paper transfer roller/discharge plate at the
2424
paper trailing edge between the erase margin area and the image area.
Normal: 120 mm/sec, Low: 60 mm/sec
001 Paper Transfer: Normal: 1st
002 Paper Transfer: Normal: 2nd
003 Paper Transfer: Low: 1st
004 Paper Transfer: Low: 2nd
2430 [Plain: Env. Correct Table] DFU
003 Paper Transfer: BW: Normal: 1st
004 Paper Transfer: BW: Normal: 2nd
005 Paper Transfer: FC: Normal:1st
006 Paper Transfer: FC: Normal:2nd
009 PaperTransfer:BW:Low:1st
010 Paper Transfer: BW:Low:2nd
*ENG
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
*ENG
*ENG
*ENG
[-98 to 0 / 0 / 2 mm/step]
*ENG
*ENG
*ENG [1 to 50 / 39 / 1 /step]
*ENG [1 to 50 / 26 / 1 /step]
*ENG [1 to 50 / 39 / 1 /step]
*ENG [1 to 50 / 33 / 1 /step]
*ENG
[1 to 50 / 25 / 1 /step]
*ENG
System SP2xxx
3
115