Ricoh D104 Field Service Manual page 952

3. Appendix: SP Mode Tables
5118 [Disable Copying]
001 This program disables copying.
[Mode Clear Opt. Counter
5120
Removal]
This program updates the information on the optional counter. When you install or remove
001
an optional counter, check the settings.
3
5121 [Counter Up Timing]
This program specifies when the counter goes up. The settings refer to "paper feed" and
001
"paper exit" respectively.
5126 [F Size Original Setting]
001 Selects F size original setting.
5127 [APS Mode]
001 This program disables the APS.
5128 [Code Mode With Key/Card Option]
001 DFU
5131 [Paper Size Type Selection]
The program selects a paper size system from the following alternatives: the AB system (0),
001
the LT system (1), and the AF system (2).
5150 [By-Pass Length Setting]
234
*CTL [0: Not disabled/ 1: Disabled]
[0: Yes (removed)/ 1: Standby (installed but not
*CTL
used)/ 2: No (not removed)]
*CTL [0: Feed/ 1: Exit]
[0 to 2 / 0 / 1 /step]
0: 8 1/2" x 13" (Foolscap)
*ENG
1: 8 1/4" x 13" (Folio)
2: 8" x 13" (F)
*CTL [0: Not disabled/ 1: Disabled]
*CTL
DFU
*ENG
[0: JP (Japan)/ 1: NA / 2: EU]
*CTL [0: OFF/ 1: ON]
-