Ricoh D104 Field Service Manual page 904

3. Appendix: SP Mode Tables
007 K5 Edit Point
008 K5 Target Voltage
009 K5 Approximate Method
010 K2: U/L Limit Coeff. 1
011 K2: Upper Limit Correction
3
012 K2: Lower Limit Correction
013 Diffusion Correction
016 K2: Check
3363 [ID Pattern Timing Setting]
001 Scan YCMBk
002 Detection Delay Time
003 Delay Time
004 MUSIC Delay Time
3371 [M/A Calculation] DFU
001 Correction Coeff.: Bk
002 Correction Coeff.: C
003 Correction Coeff.: M
004 Correction Coeff.: Y
186
*ENG [0 to 1 / 0.15 / 0.01 /step]
*ENG [0 to 5 / 1.63 / 0.01 V/step]
[0 to 1 / 1 / 1 /step]
*ENG
0:Linear, 1: Curve
*ENG [0 to 1 / 0 / 0.01 /step]
*ENG [–0.2 to 0.4 / 0.07 / 0.01 /step]
*ENG [–0.2 to 0.4 / –0.07 / 0.01 /step]
*ENG [0.75 to 1.35 / 1 / 0.01 /step]
*ENG [0 to 1 / 0.25 / 0.001 /step]
Adjusts the detection timing for the process
control pattern.
*ENG
[-500 to 500 / 0 / 1 mm/step]
Adjusts the timing when the paper transfer unit is
kept away from the image transfer belt.
*ENG
[0 to 2500 / 400 / 1 msec/step]
Adjusts the processing timing for the process
control pattern.
*ENG
[0 to 2500 / 1335 / 1 msec/step]
Adjusts the processing timing for the pattern that
is used for the line position adjustment.
*ENG
[-2500 to 2500 / 300 / 1 msec/step]
*ENG [0.5 to 2.0 / 0.99 / 0.01 /step]
*ENG [0.5 to 2.0 / 1 / 0.01 /step]
*ENG [0.5 to 2.0 / 1 / 0.01 /step]
*ENG [0.5 to 2.0 / 1 / 0.01 /step]