Ricoh D104 Field Service Manual page 911

029 Refresh:Page Thresh
030 Mode Counter:Bk
031 Mode Counter:FC
[Blade Damage Prevention]
Adjusts the threshold temperature for preventing the cleaning blade in the transfer belt
3517
cleaning unit from being damaged. If the temperature is above this value, toner is applied
to the transfer belt at set intervals during the job to prevent the blade from flipping over.
001 Execution Temp. Thresh
3518 [Image Adj. Execution Flag] DFU
001 Toner End Recovery: Bk
002 Toner End Recovery: C
003 Toner End Recovery: M
004 Toner End Recovery: Y
005 Vsg Adjustment
006 Developer Agitation
007 Process Control
008 MUSIC
009 Drum Phase Adj.
010 Charge AC Control
011 Blade Damage Prevention
012 Vsg Average Error
*ENG
*ENG [0 to 1000 / 0 / 1 page/step]
*ENG
*ENG [0 to 50 / 40 / 1°C/step]
*ENG
*ENG
*ENG
[0 or 1 / 0 / 1/step]
0: OFF. 1: ON
*ENG
*ENG
*ENG
[0 to 2 / 0 / 1/step]
*ENG
0: OFF. 1: ON (once), 2: ON (twice)
[0 to 2 / 0 / 1/step]
*ENG
0: OFF. 1: ON (once), 2: ON (twice)
*ENG
[0 or 1 / 0 / 1/step]
*ENG
0: OFF. 1: ON
*ENG
[0 or 1 / 0 / 1/step]
Sets "1", when the following values shows.
*ENG Vsg_reg_ave:
3.5 < Vsg_reg_ave < 4.5 or Vsg_dif_ave:
0.0 < Vsg_dif_ave < 0.5
System SP3xxx
3
193