Ricoh D104 Field Service Manual page 51

Emblem and Decals
1. Attach the correct emblem [A] and the cover [B] to the front door [C] of the machine, if the emblem
is not attached.
• If you want to change the emblem that has been already attached, remove the panel with an
object (not a sharp object) as shown [D], and then install the correct emblem.
2. Attach the correct paper tray number and size decals to the paper trays [E].
• Paper tray number and size decals are also used for the optional paper tray or the optional LCT.
Keep these decals for use with these optional units.
Initialize the Developer
1. Make sure that the platen or ARDF is closed and the main power is turned off.
2. Plug in the machine.
3. Turn the main power switch on. The machine automatically starts the initialization procedure. The Start
button LED turns green when this procedure has finished.
4. Make copies of image samples (text, photo, and text/photo modes).
5. Do the Automatic Color Calibration process (ACC) for each mode (Copy mode, Printer 600 x 600
dpi, Printer 1800 x 600 dpi, and Printer 1200 x 1200 dpi) as follows:
• 1) Print the ACC test pattern (User tools > Maintenance > ACC > Start).
• 2) Put the printout on the exposure glass.
• 3) Put 10 sheets of white paper on top of the test chart.
Copier Installation
2
49