Ricoh D104 Field Service Manual page 909

002 Relative Humidity
003 Absolute Humidity
[Execution Interval: Display]
Displays the current interval for process control execution.
3515
When the machine calculates the timing for process control, it uses a number of conditions.
These are the results after considering all the conditions.
001 Job End: Process Control: BW
002 Job End: Process Control: FC
003 Interrupt: Process Control: BW
004 Interrupt: Process Control: FC
[Refresh Mode]
While making prints with low coverage, the developer is agitated with less toner consumption
3516
and the toner carrier attraction tends to increase. This may cause low image density or poor
transfer (white dots). To prevent this, the coagulated toner or overcharged toner has to be
consumed by performing the refresh mode.
001 Dev. Motor Rotation: Display: Bk
002 Dev. Motor Rotation: Display: C
003 Dev. Motor Rotation: Display: M
004 Dev. Motor Rotation: Display: Y
005 Rotation Threshold
*ENG [0 to 1000 / - / 0.1%RH/step]
*ENG [0 to 1000 / - / 0.1 g/cm
*ENG [0 to 2000 / 250 / 1 page/step]
*ENG [0 to 2000 / 100 / 1 page/step]
*ENG [0 to 2000 / 500 / 1 page/step]
*ENG [0 to 2000 / 200 / 1 page/step]
*ENG
*ENG
[0 to 1000 / 0 / 0.1 m/step]
*ENG
*ENG
*ENG [0 to 1000 / 0.1 / 1 m/step]
System SP3xxx
3
/step]
191
3