Ricoh D104 Field Service Manual page 944

3. Appendix: SP Mode Tables
4807 [SBU Test Pattern Change]
-
Selects the SBU test pattern.
0: Normal output
001
1: Fixed value output
2: Main scan gradation
3 3: Sub scan gradation
4: Grid pattern
4808 [Factory Setting Input] DFU
002 Execution Flag
[ACC Data Display]
This SP outputs the final data read at the end of ACC execution.
4902
A zero is returned if there was an error reading the data.
[0 to 255 / 0 / 1 /step]
001 R DATA1
002 G DATA1
003 B DATA1
004 R DATA2
005 G DATA2
006 B DATA2
4904 [IPU Board Test]
226
- [0 to 255 / 0 / 1 /step]
*ENG [0 or 1 / 0 / 1 /step]
*ENG Photo C Patch Level 1 (8-bit)
*ENG Photo M Patch Level 1 (8-bit)
*ENG Photo Y Patch Level 1 (8-bit)
*ENG Photo C Patch Level 17 (8-bit)
*ENG Photo M Patch Level 17(8-bit)
*ENG Photo Y Patch Level 17 (8-bit)