Ricoh D104 Field Service Manual page 834

3. Appendix: SP Mode Tables
011 Paper Transfer: FC: Low:1st
012 Paper Transfer: FC: Low:2nd
[Thin: Bias: BW]
2453
Adjusts the current for the paper transfer roller for thin paper in black-and-white mode.
Normal: 120 mm/sec, Low: 60 mm/sec
3
001 Paper Transfer: Normal: 1st
003 Paper Transfer: Low: 1st
[Thin: Bias: FC]
2457
Adjusts the current for the paper transfer roller for thin paper in full color mode.
Normal: 120 mm/sec, Low: 60 mm/sec
001 Paper Transfer: Normal: 1st
003 Paper Transfer: Low: 1st
[Thin: L-Edge Correction] DFU
Thin Paper: Leading Edge Correction
Adjusts the correction to the paper transfer roller current at the paper leading edge in each
mode. SP2453 and SP2457 are multiplied by these SP values.
2471
Normal: 120 mm/sec, Low: 60 mm/sec
• The paper leading edge area can be adjusted with SP2472.
001 Paper Transfer: Normal: 1st
003 Paper Transfer: Low: 1st
[Thin: Switch Timing: L-Edge] DFU
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge plate at the
2472
paper leading edge between the erase margin area and the image area.
Normal: 120 mm/sec, Low: 60 mm/sec
116
*ENG [1 to 50 / 45 / 1 /step]
*ENG [1 to 50 / 31 / 1 /step]
*ENG [0 to 200 / 20 / 1 – A /step]
*ENG [0 to 250 / 12 / 1 – A /step]
*ENG [0 to 200 / 23 / 1 – A /step]
*ENG [0 to 200 / 13 / 1 – A /step]
*ENG
[0 to 400 / 100 / 5%/step]
*ENG