Honda 2004 Odyssey Service Manual page 300

9. Remove the three mounting bolts (A) and loosen
mounting bolt (B), then remove the battery base (C).
C
B
8 x 1.25 mm
22 N·m (2.2 kgf·m,
16 lbf·ft)
10. Remove the harness clamps (A), then remove the
fan motor connectors (B) and A/C compressor
clutch connector (C).
B
A
8 x 1.25 mm
22 N·m (2.2 kgf·m,
16 lbf·ft)
A
8 x 1.25 mm
22 N·m (2.2 kgf·m,
16 lbf·ft)
A
C
11. Remove the upper radiator hose (A), lower radiator
hose (B) and automatic transmission fluid (ATF)
cooler hoses (C). Plug the ATF cooler hoses and
lines.
C
B
12. Remove the two bolts (D) securing the ATF cooler
line.
13. Remove the radiator upper brackets/cushions (A)
and condenser bracket (B).
6 x 1.0 mm
12 N·m (1.2 kgf·m,
8.7 lbf·ft)
A
A
D
6 x 1.0 mm
9.8 N·m (1.0 kgf·m,
7.2 lbf·ft)
6 x 1.0 mm
9.8 N·m (1.0 kgf·m,
7.2 lbf·ft)
B
A
(cont'd)
10-17