Cylinder Head
Timing Belt Installation (cont'd)
4. If the auto-tensioner has extended and the timing
belt cannot be installed, perform the new belt
installation procedure.
5. Apply liquid thread lock to the idler pulley bolt, then
loosely install the idler pulley.
6. Install the timing belt in a counterclockwise
sequence starting with the drive pulley. Take care
not to damage the timing belt when installing it.
–1 Drive pulley (A).
–2 Idler pulley (B).
–3 Front camshaft pulley (C).
–4 Water pump pulley (D).
–5 Rear camshaft pulley (E).
–6 Adjusting pulley (F).
E
F
A
7. Tighten the idler pulley bolt.
6-30
D
B
10 x 1.25 mm
44 N·m (4.5 kgf·m, 33 lbf·ft)
8. Remove the battery clamp bolt from the back cover.
9. Install the engine mount bracket.
6 x 1.0 mm
12 N·m (1.2 kgf·m, 8.7 lbf·ft)
C
10 x 1.25 mm
44 N·m (4.5 kgf·m, 33 lbf·ft)