Honda 2004 Odyssey Service Manual page 276

4. Remove the throttle cable (A) and cruise control
cable (B) by loosening the locknuts (C), then slip the
cable ends out of the accelerator linkage. Take care
not to bend the cables when removing them.
Always replace any kinked cable with a new one.
C
5. Remove the engine wire harness connectors and
wire harness clamps from the intake manifold.
• Intake air temperature (IAT) sensor connector
• Idle air control (IAC) valve connector
• Throttle position (TP) sensor connector
• Manifold absolute pressure (MAP) sensor
connector
• Evaporative emission (EVAP) canister purge
valve connector (2002-2004 models)
B
A
C
6. Remove the brake booster vacuum hose (A) and
positive crankcase ventilation (PCV) hose (B).
1999-2001 models:
B
2002-2004 models:
7. Remove the vacuum hoses (C) (1999-2001 models).
C
A
A
B
(cont'd)
9-5