Engine Block
Piston, Pin, and Connecting Rod Replacement (cont'd)
Reassembly
1. Install a piston pin snap ring (A).
2. Coat the piston pin bore in the piston, the bore in
the connecting rod, and the piston pin with new
engine oil.
3. Heat the piston to about 158°F (70°C).
7-20
4. Install the piston pin (A). Assemble the piston (B)
and connecting rod (C) with the embossed marks
(D) on the same side.
A
5. Install the remaining snap ring.
D
B
C
D
A