Honda 2004 Odyssey Service Manual page 196

Used Belt
Follow this procedure when installing a used timing
belt.
1. Clean the timing belt drive pulleys, crankshaft,
camshaft pulleys, timing belt guide plate, and the
upper and lower covers.
2. Set the timing belt drive pulley to TDC by aligning
the TDC mark (A) on the tooth of the timing belt
drive pulley with the pointer (B) on the oil pump.
B
3. Clean the camshaft pulleys. Set the camshaft
A
pulleys to TDC by aligning the TDC marks (A) on
the camshaft pulleys with the pointers (B) on the
back covers.
FRONT:
B
REAR:
B
A
A
(cont'd)
6-29