NEC Univerge SV8100 Features And Specifications Manual page 1373

UNIVERGE SV8100
Program
Program Name
Number
10-09-01 DTMF and Dial Tone Circuit
Setup
15-03-01 Single Line Telephone Basic
Data Setup – SLT Signaling Type
15-03-03 Single Line Telephone Basic
Data Setup – Terminal Type
15-03-05 Single Line Telephone Basic
Data Setup – Trunk Polarity
Reverse
Single Line Telephones, Analog 500/2500 Sets
Description/Comments
If the system has 2500 type
(DTMF) single line extensions,
allocate at least one circuit for
analog extension DTMF reception
(0 or 1).
Use the following as a guide when
allocating DTMF receivers:
In light traffic sites, allocate one

DTMF receiver for every 10
devices that use them.
In heavy traffic sites, allocate

one DTMF receiver for every
five devices that use them.

The CD-CP00-US has 32
resources for DTMF
receiving and Dial Tone
detection. When a PZ-BS10
is installed there are 64
resources available.

When Program 10-09-01 is
set to 0 (Common) and
Program 14-02-10 (Caller ID)
is set to 1 (Yes), all DTMF/
Dial Tone Detection
resources are always
allocated to analog trunks,
not analog extensions.
However, if Program
14-02-10 (Caller ID) is set to
0 (No), all DTMF/Dial Tone
Detection resources can be
used for both analog trunks
and analog extensions.
Enter 0 if single line telephone is a
500 type (dial pulse). Enter 1 if
single line telephone is a 2500
type (DTMF).

Set In-Skin Voice Mail and
InMail to 0.
Enter 1 for this option to allow a
single line port to receive DTMF
tones after the initial call setup.
Enter 0 to have the port ignore
DTMF tones after the initial call
setup. For Voice Mail, always
enter 1 (e.g., receive DTMF
tones).
-- Not Used in U.S. -- Do Not
Change Default Entry as DTMF
issues may arise with voice mail.
Assigned Data
1
0 = Common Use
1 = Extension Only
2 = Trunk Only
Default:
Circuit/Resource
01~08 = 1 (Extensions)
Circuit/Resource
09~32 = 2 (Trunks)
Circuit/Resource
33~96 = 0 (Not Used)
Circuit/Resource
97~160 = 0 (Common)
When PZ-BS10 is
installed, 97~160 are
available
0 = DP
1 = DTMF
(default = 1)
0 = Normal
1 = Special
(default = 0)
0 = Off
1 = On
(default = 0)
Issue 12.0
Level
2 3




2 - 1343