NEC Univerge SV8100 Features And Specifications Manual page 1740

Issue 12.0
Program
Program Name
Number
14-02-23 Analog Trunk Data Setup –
Caller ID Receiving Method
15-05-04 IP Telephone Terminal Basic
Data Setup – Nickname
15-05-16 IP Telephone Terminal Basic
Data Setup – Authentication
Password
15-05-18 IP Telephone Terminal Basic
Data Setup – IP Duplication
Allowed Group
16-01-01 Department Group Basic Data
Setup – Department Name
2 - 1710
Description/Comments
Rings extension before receiving
Caller ID (1) or after receiving
Caller ID (0).
If Caller ID is received on a trunk
that is in the same ring group as a
uMobility client device this
should be set to 1 (Wait Caller ID).
Assign nick name to all system
phones. This is the name
displayed on internal calls to a
uMobility client device.
Assign the authentication
password for SIP single line
telephones.
If using authentication for the
uMobility Client devices the
password should be entered here.
For an adapter that has one IP
address coming into it but multiple
extensions off of it. Assign all the
extensions to a group so the CPU
knows that the one IP address is
assigned to multiple extensions.
Assign all uMobility client and
server extensions to the same
group. This group should not be
used by any non-uMobility ports.
Set the function mode for each
department group.
Set uMC server hunt group name.
UNIVERGE SV8100
Assigned Data
1
0 = Wait Caller ID
1 = Immediate Ring
(default = 1)
Station Name
(default not assigned)
Up to 24 characters
(default not assigned)
0 = Not Used
1 = Group 1
2 = Group 2
3 = Group 3
4 = Group 4
5 = Group 5

6 = Group 6
7 = Group 7
8 = Group 8
9 = Group 9
10 = Group 10
(default = 0)
Maximum 12
characters

(default not assigned)
uMobility – Server Based
Level
2 3


