NEC Univerge SV8100 Features And Specifications Manual page 1620

Issue 12.0
Program
Program Name
Number
20-07-11 Class of Service Options
(Administrator Level) – Forced
Trunk Disconnect (analog trunk
only)
24-02-07 System Options for Transfer –
Trunk-to-Trunk Transfer Release
Warning Tone
24-02-10 System Options for Transfer –
Disconnect Trunk-to-Trunk
24-04-01 Automatic Trunk-to-Trunk
Transfer Target Setup
25-07-07 System Timers for VRS/DISA –
Long Conversation Warning
Tone Time
25-07-08 System Timers for VRS/DISA –
Long Conversation Disconnect
Time
2 - 1590
Description/Comments
Turn Off or On an extension user
ability to use Forced Trunk
Disconnect. This allows the
extension user to disconnect an
Unsupervised Conference in
progress.
This timer starts when a trunk
begins talking with another trunk
(for example: Trunk-to-Trunk
Transfer, outgoing from trunk,
Tandem Trunking).
When this time expires, a warning
tone is heard. If Program 24-02-10
is set, the conversation
disconnects after time expires.
This time is set again when the
external digit time expires. One of
the trunks used must be an analog
trunk (or leased line).
This timer starts after the
Trunk-to-Trunk warning tone is
heard.
Assign the Speed Dialing number
(0~1999) to be used as the
destination for the Trunk-to-Trunk
Transfer.
Determine the time a DISA caller
or any trunk-to-trunk (such as
Tandem Trunking) conversation
can talk before the Long
Conversation tone is heard.
Determine the time the system
waits before disconnecting a DISA
or any trunk-to-trunk (such as
Tandem Trunking) call after the
Long Conversation tone is heard.
Tandem Trunking (Unsupervised Conference)
UNIVERGE SV8100
Assigned Data
1
0 = Off
1 = On
(default = 0 for
COS 1~14)
(default = 1 for
COS 15)
0~64800 (seconds)
(default = 1800)
0~64800 (seconds)
(default = 0)
Trunks: 1~200
0~1999

(default = 1999
0~64800 (seconds)
(default = 3600)
0~64800 (seconds)
(default = 10)
Level
2 3




