NEC Univerge SV8100 Features And Specifications Manual page 1831

UNIVERGE SV8100
Program
Program Name
Number
24-02-02 System Options for Transfer –
MOH or Ringback on Transferred
Calls
Assign Trunks As Automated Attendant Trunks – Method 1:
Program
Program Name
Number
22-02-01 Incoming Call Trunk Setup
22-07-01 DIL Assignment
VM8000 InMail
Description/Comments
Enable/Disable MOH on Transfer.
If set to 0, a transferred caller
hears Music on Hold while their
call rings the destination
extension. If set to 1, a transferred
caller hears ringback while their
call rings the destination
extension. For this option to work
with voice mail, the transferred call
must be an unscreened transfer.
Description/Comments
Assign Service Type 4 to each
trunk you want to ring into Voice
Mail as a Direct Inward Line (DIL).
Assign the master/pilot number of
the voice mail group from Program
11-07-01 as the DIL destination. If
all Voice Mail ports are in the
same unique Extension
(Department) Group (see Program
16-02 above), the DIL rings
another Voice Mail port if its
assigned port is busy.
Assigned Data
1
0 = Hold Tone
1 = Ring Back
Tone
(default = 0)
Assigned Data
1
Trunks 1~200
0 = Normal
1 = VRS (second
dial tone if no
VRS installed)
2 = DISA
3 = DID
4 = DIL
5 = E&M Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID(DDI) Mode
Switching
(default = 0)
Extension Number
(maximum eight digits)
(default not assigned)
Issue 12.0
Level
2 3

Level
2 3


2 - 1801