NEC Univerge SV8100 Features And Specifications Manual page 1781

Hide thumbs Also See for Univerge SV8100:
Table of Contents

Advertisement

UNIVERGE SV8100
Program
Program Name
Number
44-03-01
Dial Analysis Extension Table –
Dial
44-03-02
Dial Analysis Extension Table –
ARS/F-Route Select Table
Number
44-03-03
Dial Analysis Extension Table –
ARS/F-Route Select Table
Number
44-03-04
Dial Analysis Extension Table –
Next Table Area Number (252)
44-04-01
ARS/F-Route Selection for Time
Schedule
44-05-01
ARS/F-Route Table – Trunk
Group Number
Uniform Numbering Network
Description/Comments
Set the Dial digits (24 digits
maximum) 1~9, 0 
, @) to be
#
used for the Dial Extension
Analysis Table. When Program
44-02-02 is set to 3, this program
sets the dial extension analysis
table. These tables are used when
the analyzed digits must be more
than eight digits. To enter a wild
card/don't care digit, press Line
Key 1 to enter an @ symbol.
When dialed digits match the
setting in Program 44-03-01,
select the ARS/R-Route table
number (0~500) to be used for the
Dial Extension Analysis Table.
If the received digits are not
identified in tables 1~250, the
F-Route selection table number
(0~500) defined in table 251 is
used.
If the received digits do not match
the digits set in tables 1~250, table
number 252 is used refer to the
next Extension Table Area (1~4)
to be searched.
Assign each ARS/F-Route
Selection number (1~500) to an
ARS/F-Route table number for
each ARS/F-Route time mode.
Select the trunk group number
used for the outgoing ARS call
(1~100).
Assigned Data
1
Up to 24 digits
Digits = 1~9, 0, , #, @
(Press Line Key 1 for
wild character @)
(default = Not
assigned)
0~500
(ARS/F-Route Table
Number)
With Program 44-01
set to 0, Program
44-05 is checked.
With Program 44-01
set to 1, Program
44-04 is checked.
(default = 0)
0~500
(ARS/F-Route Table
Number)
With Program 44-01
set to 0, Program
44-05 is checked.
With Program 44-01
set to 1, Program
44-04 is checked.
(default = 0)
0~4
(default = 0)
ARS/F-Route Time
Mode: 1~8
ARS/F-Route Table
Number = 0~500
(default = 0)
0~100, 255
0 = No Setting
255 = Extension Call
(default = 0)
Issue 12.0
Level
2
3
2 - 1751

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents