NEC Univerge SV8100 Features And Specifications Manual page 1669

UNIVERGE SV8100
Program
Program Name
Number
20-06-01 Class of Service for Extensions
20-11-07 Class of Service Options (Hold/
Transfer Service) – Transfer
Without Holding
20-29-01 Timer Class for Extensions
20-31-01 Timer Class Timer Assignment –
Trunk Queuing Callback
Duration Time
20-31-02 Timer Class Timer Assignment –
Callback / Trunk Queuing Cancel
Time
Operation
To queue for a busy trunk:
1. Try to access the busy trunk.
2. Dial or press Trunk Queuing/Camp-On key (Program 15-07 or SC 751: 35).
#
3. Hang up to leave a Trunk Queuing request.
- OR -
Wait Off-Hook to Camp-On to the trunk.
To answer when Trunk Queuing calls you back:
1. Lift the handset.
Trunk Queuing/Camp-On
Description/Comments
Assign a Class of Service (1~15)
to an extension.
Turn Off or On an extension user
ability to use Transfer Without
Holding.
Assign the timer class (0~15) to
each extension for each Night
mode. This entry includes virtual
extension number.
Trunk Queuing Callback rings an
extension for this time.
The system cancels an extension
Callback or Trunk Queueing
request after this time.
Assigned Data
1
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
0 = Off
1 = On
(default = 0 for
COS 1~15)
0~15
0 = Not assigned
(default = 0)
0~64800 (seconds)
(default = 15)
0~64800 (seconds)
(default = 64800)
Issue 12.0
Level
2 3





2 - 1639