NEC Univerge SV8100 Features And Specifications Manual page 1424

Issue 12.0
Program
Program Name
Number
22-02-01 Incoming Call Trunk Setup
22-07-01 DIL Assignment
Operation
Refer to the SMB8000 Conference Bridge Installation Manual.
2 - 1394
Description/Comments
Assign Service Type 4 to each
trunk you want to ring into the
Multimedia Conference Bridge as
a Direct Inward Line (DIL).
Assign the destination extension
or Department Calling Group for
each DIL incoming trunk.
Assign the master/pilot number of
the Conference group from
Program 11-07-01 as the DIL
destination. If all Conference ports
are in the same unique Extension
(Department) Group (see Program
16-02 above), the DIL rings
another Conference port if its
assigned port is busy.
UNIVERGE SV8100
Assigned Data
1
Trunks 1~200
0 = Normal
1 = VRS (second
dial tone if no
VRS installed)
2 = DISA
3 = DID
4 = DIL
5 = E&M Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID(DDI) Mode
Switching
(default = 0)
Extension Number
(maximum eight digits)
(default = No Setting)
SMB8000 Conference Bridge
Level
2 3

