NEC Univerge SV8100 Features And Specifications Manual page 1677

UNIVERGE SV8100
Analog phones cannot be used for Agents.

Agents can not have Hotline, Prime Line or Ringdown setup on the telephone.

Up to 64 calls can be queued up at one given moment.

When using the UCB for VM, the Large LED does not light when a new VM is received. A

key in the UCB must be set to light when a new message is received. (SV8100 Version
2000, UCB 5.0 SP1 and TSP 1.01 or lower).
When using the UCB for VM, the Large LED lights when a new VM is received. A key in the

UCB can also be set to light when a new message is received (SV8100 Version 2500,
UCB 5.0 SP2 and TSP 3.01 or higher software is required).
Only one 3rd-Party CTI connection to the SV8100 is supported. If a SV8100 system has

UCB (Unified Communications for Business), the 3rd-Party Shared Services feature of
SV8100 Desktop Applications cannot be used. If a SV8100 system has SV8100 Desktop
Applications with the 3rd-Party Shared Services, UCB cannot be used.
When using K-CCIS, link reconnect is not supported back to UCB.

Virtual Extension Keys assigned as code

on Line Keys for UCB.
UCB does not support the use of Virtual Extensions as Queues (Agents and Operators)

and Pilots (Voice Mail, Hold and Executive Conference). SV8100 Version 4000 (4.01),
UCB 5.0 SP4, and TSP 3.03 or lower software.
Only one Codec can be assigned for SIP extensions. Different SIP extensions cannot use

different Codecs.
Virtual Extensions are supported for Queues (Agent and Operator) and pilot numbers

(Voice Mail, Hold, & Executive Conference). SV8100 Version 5000, UCB 5.1 and TSP
4.00 or higher software required.
Programs 45-01-01 or 45-01-14 cannot be set to the Department Group of the UCB.

Mobile Extension and UCB (Unified Communications for Business) are not supported

within the same system SV8100 Version 4000 (4.01), UCB 5.0 SP4, and TSP 3.03 or
lower.
Mobile Extension and UCB are supported within the same system. SV8100 Version 5000,

UCB 5.1, and TSP 4.00 or higher required.
When using Call Forward Both Ring (twinning) calls will not forward back to the UCB VM.

CAP keys over 999 are not supported on the phones when using UCB.

Hot Keypad is not supported when using UCB.

Boss/Secretary scenario (same Virtual on multiple phones) is not supported.

UCB cannot use Virtual Extensions for making outbound calls.

Message Waiting Lights can not be set for Virtual Extension mailboxes.

UCB (Unified Communications for Business)
03 do not support Voice Mail Message Indication

Issue 12.0
2 - 1647