NEC Univerge SV8100 Features And Specifications Manual page 1532

Issue 12.0
Program
Program Name
Number
51-05-07 NetLink Timer Settings – Socket
Refresh Time
51-06-01 NetLink Primary Automatic
Integration Setting – Primary
Integration Right or Wrong
51-06-02 NetLink Primary Automatic
Integration Setting – Package
Reset Timing Option
51-07-01 NetLink Primary Compulsion
Specification Setting – Forced
Change Primary System
Enabling
51-07-02 NetLink Primary Compulsion
Specification Setting – Package
Reset Timing Option
51-08-01 Primary NetLink Setting – IP
Address of New Primary System
51-08-02 Primary NetLink Setting –
System ID of New Primary
System
51-09-01 NetLink Communication Port
Settings – Primary Waiting Port
2 - 1502
Description/Comments
If the IP connection becomes
unstable, the keep-alive function
does not work. To avoid this, if
there is no data traffic for this time,
the socket is refreshed.
When LAN cable was divided,
multiple Primary systems may
appear. If the LAN connection is
recovered, multiple NetLinks exist
in the network. When this option is
enabled, NetLink is composed
around Top priority Primary
System.
When Primary System Automatic
Integration is done, all packages of
secondary systems reset. This
option can select the timing of
package reset.
Set this item whether the Forced
Change Primary is available or
not.
When Forced Change Primary
System is done, all packages
reset. This option can select the
timing of package reset.
0 = Reset when all packages are
idle, otherwise reject Primary
System Integration.
1 = Anytime
Enter target IP address for New
Primary system. When the Forced
Change Primary system is done,
this setting is erased.
When set to 0, top priority Primary
system is assumed to be the new
Primary system.
Set the communication port that
the Primary system uses to
communicate with the Secondary
system.
UNIVERGE SV8100
Assigned Data
1
20~3600 (seconds)
(default = 40)
0 = Off
1 = On
(default = 0)

0 = Reset when all
packages are in idle
condition
1 = Anytime
(default = 0)
0 = Disable
1 = Enable
(default = 1)
0 = Off
1 = On
(default = 0)
0.0.0.0~
126.255.255.254
128.0.0.1~
191.255.255.254
192.0.0.1~
223.255.255.254
(default = 0.0.0.0)
0~50
(default not assigned)
0~65535
(default = 58000)
SV8100 NetLink
Level
2 3






