NEC Univerge SV8100 Features And Specifications Manual page 1349

UNIVERGE SV8100
Set up Watch mode
1. Press Speaker and dial 614.
2. Dial the internal paging group number 01.
3. Dial the external paging group number 1.
4. Dial the interval time of Watch message 05.
5. Dial the VRS message number being watched 001.
6. After the beep, record message.
7. Press Speaker to hang up.
To Start Watch mode
1. Press Speaker and dial 717 + 1.
-OR-
Press function key (
-OR-
Wait for Watch mode pattern 1 to start.
2. The Watching message is sent to internal and external page group 1 (every five minutes).
To Stop Watch mode
1. Press Speaker and dial 717 + 0.
-OR-
Press the red lit function key (
-OR-
Wait for Watch mode pattern 1 to end.
Warning Message (Use Security Sensor and Warning Message):
< Program >
Program 10-41-01(Index 1): (2) Slot Number connected with 2PGDAD
Program 10-41-02(Index 1): (8) Port Number connected with 2PGDAD
Program 10-41-03(Index 1): (1) Detection circuit number on 2PGDAD where a Sensor is connected to
Program 11-10-47: (615) Warning message setting
Program 11-10-48: (617) Auto Dial Setting for Security Sensor
Program 11-12-62: (716) Security Sensor Reset
Program 11-12-64: (719+1/0) Security Sensor Mode Start/Stop
Program 15-07-01: Set
Security
32), the function keys turn red.

32), the function keys turn off.

33 to Function key

Issue 12.0
2 - 1319