Table 2-122 Sv8100 Vm8000 Inmail Part Numbers And Capacities - NEC Univerge SV8100 Features And Specifications Manual

UNIVERGE SV8100
P/N 670966
P/N 670784
P/N 670843
P/N 670872
P/N 670873
P/N 670874
P/N 670103
Mailboxes
VM8000 InMail: External Transfer Available
The software allows the VM8000 InMail to perform an external transfer. This allows the VM8000 InMail
to route an incoming Automated Attendant call out of the UNIVERGE SV8100 system on a new trunk
based on an Speed Dial number stored in a Dial Action Table.
VM8000 InMail: Softkey With Security Code Programming
VM8000 InMail provides softkeys when programming the security code. These softkeys allow a user to
select OK, CLEAR or EXIT following an entry of a new code.
VM8000 InMail: Internal Message Notification Timer
When Message Notification places a call out, the system waits up to 30 seconds for ringback, reorder, or
busy tone from the trunk. If detected, notification call out processing begins normally. If not detected, the
system abandons the call and decrements the Ring No Answer (RNA) count.
VM8000 InMail: Directory Dialing
Directory Dialing allows an Automated Attendant caller to reach an extension by dialing the first few
letters in the extension user's name. With Directory Dialing, the caller does not have to remember the
extension number of the person they wish to reach – just the name.
The following conditions apply to InMail Directory Dialing:
Remote CCIS extensions are not supported in a centralized directory.

VM8000 InMail

Table 2-122 SV8100 VM8000 InMail Part Numbers and Capacities

SV8100 VM8000 InMail 1G Drive
(1) 64-Hour CompactFlash Card with software.

SV8100 VM8000 InMail 8-Port License
SV8100 VM8000 InMail 16-Port License
SV8100 VM8000 InMail 2-Port License
SV8100 VM8000 InMail 4-Port License
Language License
(1) PZ-VM21 Daughter Board Interface for InMail CompactFlash
Station Mailboxes = 512
Routing Mailboxes = 32
Group Mailboxes = 32
Total Mailboxes = 576
Issue 12.0
2 - 1789