NEC Univerge SV8100 Features And Specifications Manual page 886

Issue 12.0
Program
Program Name
Number
84-14-16 SIP Trunk Basic Information
Setup – SIP Trunk SIP-URI E.164
Incoming Mode
Video Support over SIP Trunks
Program
Program Name
Number
10-12-01 CD-CP00-US Network Setup – IP
Address
10-12-03 CD-CP00-US Network Setup –
Default Gateway
10-12-08 CD-CP00-US Network Setup –
ICMP Redirect
2 - 856
Description/Comments
When this data is set to 1, then for
any inbound SIP calls that include
a + and a country code not defined
in Program 10-02-01, delete the +
and add the International Access
Code in Program 10-02-02. If the
country code is a match then
delete both the + and country code
but do not add the International
Access code.
When it is set to 2, then for any
inbound SIP calls that include a +
and a country code not defined in
Program 10-02-01, delete the +
and add the International Access
Code in Program 10-02-02. If the
country code is a match then
delete both the + and country code
and add the Caller ID Edit Code
from Program 10-02-03.
Description/Comments
It is recommended to set this
program to 0.0.0.0. All
connections to the system are
made through the IPLB.
Assign the default gateway IP
address for the CD-CP00-US.
When receiving ICMP redirect
messages, this determines if the
IP Routing Table updates
automatically or not.
IP Trunk – (SIP) Session Initiation Protocol
UNIVERGE SV8100
Assigned Data
1
0 = Disable
1 = Mode 1
2 = Mode 2
(default = 0)

Assigned Data
1
0.0.0.0~
126.255.255.254
128.0.0.1~
191.255.255.254
192.0.0.1~
223.255.255.254
(default =
192.168.0.10)
0.0.0.0~
126.255.255.254
128.0.0.1~

191.254.255.254
192.0.0.1~
223.255.255.254
(default = 0.0.0.0)
0= (Enable)
1= (Disable)
(default = 0)
Level
2 3
Level
2 3

