NEC Univerge SV8100 Features And Specifications Manual page 1823

Hide thumbs Also See for Univerge SV8100:

Table of Contents

UNIVERGE SV8100

Message Notification

Find-Me Follow-Me

The following options can only be changed from UserPro, WebPro, PCPro or system

programming for station subscriber mailboxes:

Email Notification

Message Notification

Find-Me Follow-Me

While on an intercom (ICM) call, dial the Quick Transfer Access Code (default: 8) to

automatically transfer to that station Voice Mail box.

Extension ID numbers cannot start with 0, 9,

Mailboxes with extension IDs of 10-32 are not supported as these are already used by fixed

system resources.

Distribution List members can only have 2 or 3 digit extension IDs.

Live Record does not work for monitored calls.

Live Record does not work for conference calls.

Fixed Call Forwarding can be used to transfer a user's unanswered calls to their voice mail.

Call Forwarding does not have to be programmed manually by each user.

Off-premise notification and external extensions require access to outside lines.

When the voice mail places a call on hold, it uses Group Hold. Any line appearances for the

trunk shows the hold flash rate, however, a user cannot pick up this call (a busy signal is

Updating the system time also updates the VM8000 InMail time.

VM8000 InMail and UM8000 Mail cannot be used at the same time in the same system.

The displayed message count for New and Saved messages does not update until the

mailbox user hangs up and calls back into the VM8000 InMail.

VM8000 InMail and Analog Voice Mail cannot be used at the same time in the same

The first port of VM8000 InMail must start with the first port of a group of eight station ports

that are not already used by telephones. For example one of the following ports: 1, 5, 9, 13,

.....233, 237, 241, 245, 249, etc. and uses the first port assigned + the next eight

consecutive ports.

VM8000 InMail

Show Quick Links

Table of Contents