NEC Univerge SV8100 Features And Specifications Manual page 1116

Issue 12.0
Swapping Between Two Held Calls from the Mobile Extension
1. While on a call, press * #.
The first call is placed on Hold.
2. Place second call, then place on Hold by pressing * #.
The second call is placed on Hold and the first call is picked up.
3. The Mobile Extension can connect the two held calls with Automatic On-Hook Transfer if Program
20-11-11 is enabled by dialing * 0.
Transferring a call from the Mobile Extension
1. With an active call, press * #.
2. Dial the extension number to which the call is to be transferred.
3. Dial * 0.
4. Hang up.
Call Forwarding:
When setting Call Forwarding from the Mobile Extension, the service code(s) must be defined in
Programs 11-11-01~11-11-05 and 11-11-07.
To activate or cancel Call Forwarding to/from the Mobile Extension:
1.
When activating Call Forwarding From the Mobile Extension:
Dial the DID or DIL telephone number for the Mobile Extension.
If the Caller ID of the Mobile Extension matches the Speed Dial bin entry (Program 13-04 and
15-22), internal dial tone is heard by the Mobile Extension user.
-OR-
When activating Call Forwarding to the Mobile Extension:
Press CALL key or lift the handset.
2. Dial the service code defined in Program 11-11-01~11-11-05 and.
3. Dial Call Forwarding condition:
1 = Set
0 = Cancel
4. Dial the destination extension or Off-Premise number.
5. Dial 0 (from Mobile Extension only).

6. Hang up.
2 - 1086
UNIVERGE SV8100
Mobile Extension