NEC Univerge SV8100 Features And Specifications Manual page 1026

Issue 12.0
Operation
To place a call on a loop key:
1. Press outgoing or both ways loop key.

You hear dial tone and the key lights green.
2. Dial number.
To answer a call on a loop key:

Listen for ringing or look for a flashing loop key.
1. Press loop key.

The key lights green and you connect to the call.

If there are additional calls waiting to be answered, your display shows: [WAITING - LOOP KEY]
To program a loop key:
1. Press the SPK key.
2. Dial 752.
3. Press the key you want to program as a loop key.
4. Dial 05.

5. Dial the loop key type:
0 = Incoming only

1 = Outgoing only

2 = Both ways (incoming and outgoing)

6. Dial the loop key routing option for incoming, outgoing, or incoming and outgoing calls:

If you selected option 2 in step 5 above, enter the incoming Trunk Group followed by the outgoing Trunk Group.
7. Press SPK to hang up.
2 - 996
UNIVERGE SV8100
Loop Keys